THIS SITE IS FOR SOFTWARE DEMONSTRATION PURPOSES ONLY - THIS IS NOT A POWERSPORTS DEALERSHIP AND NONE OF THE INVENTORY SHOWN IS AVAILABLE FOR SALE.
This is not an offer for credit and should be used for estimation purposes only based on the information you provided. You should not base your decision on this estimate alone. Title, registration, tax and other fees, and personal circumstances such as employment status and personal credit history, were not considered in the calculations.
Front - Dual 330-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo Stylema® monobloc radial callipers with 4 30 mm opposing pistons. Sintered pads. Radial pump and metal braided brake hose
Rear - 220 mm diameter disc; Brembo calliper with two 32 mm separate pistons. Sintered pads. Pump with integrated tank and metal braided hose
Bosch 9.1 MP ABS with cornering function, adjustable to 3 maps equipped with RLM (Rear wheel Lift-up Mitigation)
Forged aluminium alloy wheels, completely machined, with 5 split spoke design
Front - 3.5 x 17 in.
Rear - 6 x 17 in.
Front - 120 / 70 ZR 17
Rear - 200 / 55 ZR 17
Dry - 390.2 lb. (177 kg)
Kerb (with a full tank) - 438.7 lb. (199 kg)
Straight cut gears and integrated flexible coupling, drive ratio - 73/44 (1,659)
Secondary drive - Chain
Drive ratio - 41/16 (2.562)
APRC System (Aprilia Performance Ride Control), which includes Traction Control (ATC), Wheelie Control (AWC), Launch Control (ALC), cruise control (ACC) and speed limiter (APT), all of which can be configured and deactivated independently
Choice of three different engine maps selectable by the rider with bike in motion - Track, Sport, Race
1st - 39/15 (2.600)
2nd - 33/16 (2.063)
3rd - 34/20 (1.700)
4th - 31/21 (1.476)
5th - 34/26 (1.307)
6th - 33/27 (1.222)
Gear lever with Aprilia Quick Shift electronic system (AQS)
Airbox with front dynamic air intakes. 4 Marelli 48-mm throttle bodies with 8 injectors and latest generation Ride-By-Wire engine management
Aluminium dual beam chassis with pressed and cast sheet elements Available adjustments
Headstock position and rake
Swingarm pin height